“Bring T-VINYL Craft to Life”

Name: Flock
Brand: Heat Transfer Vinyl | T-vinyl | manufacturer | Korea
SKU: 83441
Availability: BackOrder
Rating: 5 (1 reviews)

Enjoy Your Life!

WE MADE SOFT, ELASTIC SKIN WITH OUR OWN COATING, LAMINATING AND RESIN MIXING TECHNOLOGY FROM SOUTH KOREA.

IF YOU WANT TO BUY HEAT TRANSFER VINYL SHEETS OF COST-EFFECTIVENESS AND TOP QUALITY FOR YOUR CRAFT, PLEASE DON’T HESITATE TO CLICK ‘T-VINYL’

WITH COMPARING TO ANY OTHER HEAT TRANSFER VINYL, YOUR CHOICE OF T-VINYL WOULD NOT BE REGRETTED.

KEY PRODUCT FEATURES

• TAILORED-GRADE VINYL
• COMPOSED OF VIBRANT AND BEST COLORS
• PREMIUM QUALITY
• WIDELY APPLICATION FOR VARIOUS FABRIC

Precise To Cut

T-VINYL is compatible with many kinds of cutting machines, such as Cricut Explore Air, Cricut Maker, Silhouette Cameom, Roland, Graphtec etc.

Soft To Peel

T-VINYL is soft and even. and sticky pressure sensitive carrier allows you to weed and transfer very easily. It will make your crafting all the enjoyable.

Admire

T-VINYL use durable and stretchable material. Our special layer of adhesive, stretchable skin, matt finish, lightweight and thin.

HOW TO USE

1. REVERSE
Open your design appearing image.

2. CUT
Cut in reverse. Glossy carrier side down.

3. PEEL
Remove needless vinyl around your image.

4. PREHEAT
Preheat iron. Preheat garment for 2~3sec.

5. PLACE
Place the design pattern in its final position. Please make sure to use an Ironing Board.

6. HEAT PLACE
Use an iron or heat press for 302˚F/15sec.

7. HOT PEEL
Remove the clear polyester carrier.

8. WAIT
Be sure to wait 24hours first wash.

Improvement in Quality

1.Ironing

– For best results, heat press is strongly recommended

– The temperature of Irons varies a lot. Test a small piece of vinyl in a hidden spot of your garment to try your settings.

– For irons with steam outlets turn off steam and after first press moves iron once ¼˝ in any direction to offset outlets and press again to heat under steam outlets. If ironing, use something like a Silicon Ironing Pad which is flat hard heat-resistant surface covered with one layer of flat cotton fabric.

– Preheat fabric before positioning your design. Preheat press or iron. Hold iron steady with very firm pressure for 10-15 seconds. Do not slide. For large designs press, several times heating each area as specified until the design is covered completely.

– Be sure to consistently apply pressure so the design is fully attached.

2. Washing

– Leave the garment for 24 hours before washing.
– The standard machine is washable. Wash garments inside out.
– Do not bleach
– Dry at normal setting

3. Cautions

– Iron-on vinyl recommend uses: cotton, polyester, cotton/polyester blends materials.
– Keep away from direct sunlight, hot and humidity for storage.
– Keep in mind that an old/ used blade may require higher cut settings than a brand-new blade.